Z70 v2
27
➢
Update detected. Rebooting...
: A file has been detected that will update the
firmware.
➢
No updates found
: no file with different version than the current one has been
detected.
For further details on the update process, please refer to the “
Firmware update
” specific
Note:
Firmware updates do not re-set the alarm and error logs, nor does it clear the on-screen
user configuration.
Important:
firmware updates via USB can be disabled in parameters (see section 2.1.9). Please
bear in mind that if such possibility is left disabled and a new version of the application is
downloaded before having updated the firmware to the corresponding version, then it will not be
possible to re-enable it unless the application program is reverted to the version that
corresponds to the current firmware version.
In other words: the device does not apply any further parameter changes in case of a version
mismatch between the application program and the firmware. Therefore, it is always advisable
to update the firmware (which will imply having the USB option already enabled, if necessary)
prior to updating the application program.
2.1.9.2
LICENCE SETUP
Some of the functionalities available in Z70 v2 require the installation of a license for their use.
If it is not pre-installed, it will be provided by Zennio in a
.lic
file.
Licence
Functionality
“Com”
“Remote”
“All”
Video Intercom
Internal Calls
Remote control via IP
Table 1.
Functionalities associated with licenses
To install any of the licenses, the
.lic
license files must be included in the root directory of a USB
memory or in a folder and/or
.zip
file named
license
and
z_license.zip
respectively.