Z70 v2
24
Figure 12.
Touch Locking.
1-Bit Object
[
enabled
]: enables the 1-
bit object “
[General] Touch Locking
” to trigger
the touch lock.
➢
Value
[
0 = Unlock, 1 = Lock
/ 0 = Lock, 1 = Unlock
]: parameter to select which value
should trigger which action when received through the indicated object.
Scene Object
[
disabled
/enabled
]: enables the touch locking and unlocking when
receiving the configured scene value through the object (“
[General] Scene: receive
”).
➢
Lock: Scene Number (0 = Disabled)
[
0/
1
…64
]: scene number that locks the touch.
➢
Unlock: Scene Number (0 = Disabled)
[
0/
1
…64
]: scene number that unlocks the
touch.
Message Notification
[
Touch Locked
]: textbox to enter the desired message.
2.1.8
SOUNDS
Z70 v2 emits
3 types of sounds
, depending on the action performed:
Press Confirmation:
short beep indicating that the user has pressed a button. This only
applies to step controls, i.e., controls that go through a certain range of values and that
do not send a value after every touch, and to page accesses.
Sending Confirmation:
a slightly longer and sharper beep than the previous one. It
indicates the sending of an object to the bus as a result of a press.
Doorbell:
sharp and longer beep than the previous one, high intensity. The volume and
ringtone of the doorbell can be chosen by parameter, object or from the screen itself.