SOURCE CONNECTIONS
PV152
1-12
PRO1200 SOURCE CONNECTION
4/5
Component video
8
with Tri-level sync
R, G and B with composite sync on Green;
3
RGB
3
R, G and B with separate composite or with separate Horizontal
and Vertical sync.
Port No
Projector input
Numeric button
Description of input signal
1
Composite Video
1
S-video : Y/C (luma/chroma).
The Composite video can also be connected to Port 2. It can be
2
S-Video
/ Composite Video
2
selected inside the "Picture Tuning" menu. Please refer to the
Owner's Manual of this projector.
Signal input connection
The following signals can be connected to the projector
through the inputs on the back panel of the projector :
• Composite Video
• S-Video
• RGB
• Component Video
• RGB with Tri-level sync
• Component video with Tri-level sync
ON
OFF
POWER / MAINS
8 0 0 p e r i p h e r a l s
R
G
B
Comp-/H-SyncV-Sync
COMM. PORT
PORT 3
PORT 4/5
V-nom
I-nom
Freq
See installation instructions before connecting to the supply.
Voir la notice d'installation avant de raccorder au réseau.
120/230 V
7/5 Amp
50/60 Hz
S-VIDEO
OFF - ON
75 Ohm
VIDEO
green : operation
red : standby
PORT 2
PORT 1
OFF - ON
75 Ohm
PROJECTOR MODE
1
2
3
4
5
This device complies with part 15 of
the FCC rules. Operation is subject to
following two conditions (1). This
device may not cause harmful inter-
ference, and (2) this device must
accept any interference received
including interference that may cause
undesired operation"
75
Ω
Termination Switch
R, G and B with composite sync on Green;
4/5
RGB
4 or 5
R, G and B with separate composite or with separate
Horizontal and Vertical sync.
R-Y, Y, B-Y with composite sync on Y;
4/5
Component video
6
or with separate composite or with separate Horizontal and
Vertical sync.
R, G and B with Tri-level sync on Green;
4/5
RGB with Tri-level sync
7
R, G and B with separate Tri-level sync or with separate
Horizontal and Vertical Tri-level sync.
R-Y, Y, B-Y with Tri-level sync on Y; or with separate Tri-level sync
or with separate Horizontal and Vertical Tri-level sync.
Connecting a Composite Video source to Port 1
Composite video signals coming from a VCR, OFF air signal
decoder and so on can be connected to Port 1.
To select the video input :
Press the
numeric button 1
on the RCU or the local keypad
.
75 W Termination Switch for Video
Terminate the video input of the projector using the 75W
switch next to the video input, when the projector operates
alone or when the projector is the last unit in a loop-through
configuration.
The switch is set to "ON" :
signal terminated.
The switch is set to "OFF" :
signal not terminated.
