FOCUS
PV152
1-36
PRO1200 FOCUS
Focusing
Before starting the 'focusing' adjustment, be sure the lenses
are correctly focused.
Push the control disk up or down to select 'Focusing' and
press
ENTER
.
ENTER
continues to the Focusing color select menu.
EXIT
returns to Internal Crosshatch Selection or Setup
Pattern Selection menu.
ADJUST
returns to operational mode.
Focusing color select.
The focusing has to be done for the three colors separately.
Therefore, start by selecting Green by pushing the control
disk up or down and adjust Midpoint, top, bottom left and
right focusing.
Return to this focusing color select menu and continue with
Red and Blue. Repeat for both colors Midpoint, top, bottom
left and right focusing.
ENTER
selects the focusing menu for the selected color.
EXIT
returns to the Random access main menu.
Midpoint focusing
Push the control disk up or down to select midpoint and
press
ENTER
continue with the midpoint focusing.
Adjust by pushing the control disk to the left or to the right
until the center of the image is sharp.
Press
ENTER
to return to the focusing menu.
Top image focusing
The same procedure has to be repeated as for the midpoint
focusing.
Push the control disk up or down and press
ENTER
to
continue to the top focusing.
Push the control disk to the left or to the right to adjust the
top focusing. Adjust until the upper part of the image is
sharp.
ENTER to return to the Green Focusing menu.
Bottom image focusing
The same procedure has to be repeated as for the midpoint
focusing.
Push the control disk up or down to select bottom and press
ENTER
to continue to the bottom focusing.
Push the control disk up or down to adjust the bottom
focusing. Adjust until the lower part of the image is sharp.
ENTER
to return to the Green Focusing menu.
Left image focusing
The same procedure has to be repeated as for the midpoint
focusing.
Push the control disk up or down to select LEFT and press
ENTER
to continue to the left focusing.
Push the control disk up or down to adjust the left focusing.
Adjust until the left part of the image is sharp.
ENTER
to return to the Green Focusing menu.
Right image focusing
The same procedure has to be repeated as for the midpoint
focusing.
Push the control disk up or down to select RIGHT and press
ENTER
to continue to the right focusing.
Push the control disk to the left or to the right to adjust the
right focusing. Adjust until the right part of the image is
sharp.
ENTER
to return to the Green Focusing menu.
When on the Green Focusing menu, press EXIT to return to
the focusing color select menu and continue with the other
colors.
Blue on source
After focusing the three color, and a discoloring on a normal
image is still visible, select
'Blue on source'
on the Focusing
menu and repeat the above steps for Midpoint, top, bottom
left and right focusing.
Press
EXIT
to return to focusing menu.
