background image

G-30-1529-en

 OPMI® VISU 160 on S8, S81 & S88 Suspension Systems

Issue 5.0

Printed on 09. 10. 2006

Maintenance / Further information

209

Disposal

User information 
on the disposal of electrical and electronic devices

This symbol means that the product must not be disposed of as normal
domestic waste.
The correct disposal of electrical or electronic devices helps to protect the
environment and to prevent potential hazards to the environment and/or
human health which may occur as a result of improper handling of the de-
vices concerned.
For detailed information on the disposal of the product, please contact
your local dealer or the device manufacturer or its legal successor. Please
also note the manufacturer's topical information on the internet. In the
event of resale of the product or its components, the seller is required to
inform the buyer that the product must be disposed of in accordance with
the applicable national regulations currently in force.

For end customers in the European Union

Please contact your dealer or supplier if you wish to dispose of electrical
or electronic devices. 

Information on disposal in countries outside the European Union

This symbol is only applicable in the European Union. For the disposal of
electrical and electronic devices, please observe the relevant national
legislation and other regulations applicable in your country.

 

Summary of Contents for OPMI VISU 160











































































































































































































































Reviews: