Zeiss CenterMax, Operating Instructions Manual

Page: 62 / 166

4-4
Transport and installation
61211-1020202 CenterMax Operating Instructions
Installation
Separate document
You received the document "Installation Instructions“ prior to the
delivery of the coordinate measuring machine. This document informs
you about all measures to be taken for transport and installation. In
the following, we will refer to some of the most important points con-
tained in this document.
Selecting the installation site
The place of installation must meet the following requirements. The
following questions must be clarified:
– Is the room height sufficient?
– Is enough space available?
– Is the floor suitable for the weight of the CMM and the fork-lift
truck?
– How strong are the vibrations at the installation site?
Disturbing vibrations may for example be caused by machines in
adjacent rooms or buildings.
– Does the installation site comply with all of the environmental con-
ditions required for perfect operation of the CMM?
– Is the installation site free from coarse dirt particles, such as casting
sand and metal chips?
– Have the requirements for the compressed air supply been met?
For more information, please refer to the document "Installation
Instructions“.
Carrying out vibration analysis
A vibration analysis must be carried out in any case. The result of the
analysis must be made available to ZEISS for planning purposes. An
additional foundation may be necessary.
ZEISS can carry out a vibration analysis for you. You can order it under
the order no. 600008-0276.
• Dial +49.(0)7364.20.3471 if you want ZEISS to carry out a vibra-
tion analysis.
NOTE