Figure 6: Host Cable Connection
3. Insert the bracket on interface cable to the cable release hole of the mounting
plate as shown. Make sure the flat side of the bracket goes in first
8
Figure 7: Cable Holder
4. Insert the latches of the mounting plate into the latch holes of the scanner.
Figure 8: Latches
5. Close the mounting plate as shown in the figure.
Summary of Contents for Z-6182
Page 1: ......
Page 8: ...3 Finding Your Way Around 3 1 Outline Figure 1 Outline 3...
Page 33: ...12 Dimension Unit mm inch 28...
Page 34: ...13 Decode Zone 29...
