20
7. Operation
7.1 LED Indications
There are red and blue dual color LED indications on the head of the device
indicating the operational status of the scanner.
LED Status
Indication
LED off
No power supplied to the scanner.
Steady blue light
The scanner is powered on and ready to scan.
One red flash
A barcode has been successfully decoded.
A barcode has been successfully decoded, but the
object is not removed from the scan window.
Steady red light
The scanner is in programming mode.
Flashing blue light
The scanner is in sleep mode.
Steady red/blue light
This indicates the scanner has a motor or laser
failure. For motor failure, a periodic beep is
sounded. In this case, return the unit for repair.
Flashing red light
The scanner is programmed in USB interface but
not connected to a host device.
7.2 Sound Indications
The device uses a speaker to give audio feedback on scanner operation. The
following are the sound indications.
Beeps
Indication
One beep
A barcode has been successfully decoded.
Two beeps: low-high
The scanner has entered programming mode.
Two beeps: same tone
Scanner has returned from programming to
normal mode.
Four beeps in series
This indicates the scanner passed self-test when
powered on and is operating properly.
Continuous tone
This is a failure indication. Return the unit for
repair.
Summary of Contents for Z-6182
Page 1: ......
Page 8: ...3 Finding Your Way Around 3 1 Outline Figure 1 Outline 3...
Page 33: ...12 Dimension Unit mm inch 28...
Page 34: ...13 Decode Zone 29...
