15
5. Slide the mounting plate into the scanner. Be careful not to pinch any cables.
Figure 17: Cable installation completed
5.4 Back
Mounting
are
readed to accommodate M3 x 0.5 machine screws to a depth of 6.0 mm.
face cable connection, but requires that
e cable exits from the back of the unit.
If desired, the scanner may be mounted to your own custom bracket by using the
threaded mounting holes at the back (See Figure 1). The mounting holes
th
Make sure your bracket design allows for the exit of the interface cable. The
supplied mounting plate protects the inter
th
Summary of Contents for Z-6182
Page 1: ......
Page 8: ...3 Finding Your Way Around 3 1 Outline Figure 1 Outline 3...
Page 33: ...12 Dimension Unit mm inch 28...
Page 34: ...13 Decode Zone 29...
