Zebex Z-6182, User Manual, Page: 26 / 36

7.3 Tone and Volume Adjustment
The scanner can be programmed with the Programming Guide to change beeper
tone, volume and duration; the tone and volume can also be changed by using the
touch control sensors in the front.
Touch Control Sensor
Tone Volume
There are three tones to choose from. Gently touch the note sign and the scanner
would change to its next tone. Repeat touching till the desired tone is heard.
On the other hand, there are three levels of volumes to choose from. To change
the volume, gently touch the volume sign and the scanner would cycle to its next
level. Repeat touching it till the desired level is reached.
Figure 18: Tone & Volume Adjustment
The volume setting is saved in volatile memory. That means the change will
lost when the scanner powers down. On next power-up the scanner would
reset to the configured setting. If you wish to keep the changed volume setting,
use the Programming Guide to set and save the changes.
21