Zebex Z-6182, User Manual

Page: 24 / 36

When disabled (default), the EAS tag is de-activated independently of any barcode
scanning.
Setting EAS Active
Use this setting to set the polarity of the EAS allowing the scanner to send an EAS
output after a good barcode read to deactivate a tag on the product.
Setting EAS Timeout
Use this setting to set EAS Timeout. EAS output signal is held in its active state for
a good read indication. To set the timeout:
1.
Scan the Enter/Exit Programming barcode to begin the setup.
2. Scan 3 ASCII number barcodes (Please see Programming Guide) to set the
time in millisecond. For example:
 000:disable the feature
 001:10 msec
 002:20 msec
 250:2500 msec (2.5second)
3. Scan the Enter/Exit Programming barcode to save the settings.
EAS Pin-out
Function Color Note
1 Ground Red
2 Orange
3 Antenna- Black
4 EAS In Green
5 EAS Out White Open collecor output
6 Shield Purple
19