____________________
1
____________________
IMPORTANT INSTALLATION
INSTRUCTIONS
WARNING:
To reduce the risk
of severe injury or death:
1.
READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS.
2.
Install only on a properly balanced garage door. An improperly
balanced door has the potential to inflict severe injury. Have a
qualified service person make repairs to cables, spring assemblies
and other hardware before installing the opener.
3.
Remove all ropes and remove or make inoperative all locks
connected to the garage door before installing the opener.
4.
Where possible install the door opener 7 feet or more above the floor.
Mount the emergency release 6 feet above the floor.
5.
Do not connect the opener to the source of power until instructed to
do so.
6.
Locate the control button:
a. Within sight of the door.
b. At a minimum height of 5 feet so small children are not able to
reach it.
c. Away from all moving parts of the door.
7.
Install the Entrapment Warning Label next to the control button in a
prominent location. Install the Emergency Release Marking. Attach
the marking on or next to the emergency release.
8.
After installing the opener, the door must reverse when it contacts a
1.5 inch high object (or a 2” by 4” board laid flat) on the floor.
Summary of Contents for 8825-R4
Page 1: ......
