24
Z21 XL BOOSTER
24
Thank you very much for choosing a Z21 XL BOOSTER
from ROCO and FLEISCHMANN!
On the following pages, we will tell you what you need to know in order to connect the
Z21 XL BOOS-
TER
to your system and put it into operation. You will find many practical tips in this manual. Please read
these instructions and warnings carefully before using the unit. Although the
Z21 XL BOOSTER
is desi-
gned to be very robust, incorrect connection or operation may result in permanent damage to the unit.
Important Notes:
• If you combine the
Z21 XL BOOSTER
with products from third party manufacturers, there is no
warranty in the event of damage or malfunction.
• The
Z21 XL BOOSTER
must never be supplied with AC voltage.
• Use a separate power supply unit for each
Z21 XL BOOSTER
, otherwise a short circuit to ground
can easily occur and destroy your
Z21 XL BOOSTER
or other digital components!
• Do not use the
Z21 XL BOOSTER
if the mains plug, the mains cable or the unit itself is defective
or damaged.
• Only carry out connection work when the operating voltage is switched off.
• Opening the housing of the
Z21 XL BOOSTER
voids all warranty claims.
• Work carefully and ensure that no short circuits occur when connecting to the track system.
Incorrect connection can destroy the digital components. If necessary, ask your specialist dealer
for advice.
• During operation, the
Z21 XL BOOSTER
may heat up. Ensure sufficient distance to neighboring
parts to guarantee adequate ventilation and cooling of the unit.
• Never leave your model railway layout in operation unattended! If a short circuit occurs unnoticed,
there is a risk of fire due to heating!
Summary of Contents for XL BOOSTER
Page 23: ...23 DEUTSCH Z21 XL BOOSTER ...
Page 45: ...ENGLISH Z21 XL BOOSTER 45 ...
Page 67: ...FRANÇAIS Z21 XL BOOSTER 67 ...
