![background image](http://html2.mh-extra.com/html/yuchai/u35/u35_operators-manual_4668496074.webp)
4-5
⚫
Start the engine with an auxiliary cable.
Warning: When the battery electrolyte freezes, if (1) you try to charge,or (2)
jump-start the engine, the battery will explode. To prevent the battery
electrolyte from freezing, keep it fully charged. If you do not follow these
instructions, you or others will be harmed.
Warning: The battery can produce explosive gases. Keep away from sparks,
flames, and fireworks. When charging or using the battery in enclosed
areas, it is important to maintain ventilation and wear eye masks when
working near the battery.
Incorrect auxiliary cable connection can cause battery explosion. Therefore, it is necessary
to abide by the following regulations.
1) When starting with an auxiliary cable, two
people are necessary for the operation (one
person to sit in the operator's seat and the other
to operate the battery).
2) When starting with another machine, the two
machines should not come into contact.
3) When connecting auxiliary cables, turn the key
switches of the normal and faulty machines to
the OFF position.
Otherwise, there is a danger of the machine
moving when the power is turned on.
4) When installing the auxiliary cable, be sure to
connect the battery negative (-) last; when
removing the auxiliary cable, disconnect the
battery negative (-) cable first.
5) When disassembling the auxiliary cables, be
careful not to let the auxiliary cable clamps come
into contact with each other or with the machine.
6) When starting the engine with an auxiliary
cable, be sure to wear protective goggles and
rubber gloves.
7) When connecting a normal machine to a faulty
machine with auxiliary cables, use a normal
machine with the same battery voltage as the
faulty machine.
Summary of Contents for U35
