![background image](http://html2.mh-extra.com/html/yuchai/u35/u35_operators-manual_4668496148.webp)
6-2
Safety Precautions
If you install accessories or options that are not approved by Yuchai, it will not only affect the
service life of the machine, but also cause some safety problems.
During installing accessories that are not approved by Yuchai, please contact Yuchai dealer
in advance.
If not, we will not be liable for any accidents or damages caused.
1. Safe operation accessories
● The accessories have powerful auxiliary functions. To prevent serious injury or damage,
the accessories shall be used correctly.
● Do not use the accessories before reading and understanding the instruction thoroughly. If
the instruction is lost, please ask the manufacturer or accessory sales company for a new
one.
● Install the necessary front guard on the machine as per condition of the accessories.
● According to the condition of the accessories, vibration and noise can make it difficult for
colleagues to convey operating instructions. Before starting the operation, a commander
shall be assigned and the signal to be used shall be determined.
● If there is a heavy load on the accessories, do not make turning to the side, especially on
slopes, it is very dangerous.
● Compared with a machine equipped with a bucket, the load at front of the working device
is larger and is unstable for the machine equipped with a breaker hammer. To avoid the risk
of tipping, do not operate if the accessory is turned to the side.
● After installing the accessories, the rotation range and the center of gravity of the machine
are different, and the machine may move unexpectedly. Be sure to properly check the
condition of the machine.
● Before starting operation, set a cordon around the machine to prevent personnel from
entering. Do not operate the machine if there are people near the machine.
● To prevent serious accidents caused by wrong operation, do not put your feet on the
pedals except operating the pedals.
2. Disassembly or assembly of accessories
During accessories disassembly or assembly, be sure to follow the steps below to ensure
safety.
● Disassembly and assembly on a firm and level ground.
● If there are two or more people performing operations, ensure and follow these signals
during operation.
● A crane shall be used during lifting or carrying heavy objects (over 25Kg).
● During disassembling heavy parts, support the parts before disassembling. During lifting
with a crane, pay special attention to the position of the center of gravity.
● It is dangerous to operate if the load is lifted by a crane. Prepare a support and keep it
safe.
Summary of Contents for U35
