2-18
16) When working on slopes, there is a risk
of the machine losing balance and tipping
over when operating for slewing and the
attachment. This can cause serious injury or
equipment damage, therefore, when
performing these operations, it is necessary
to pile up a sturdy and level platform with
soil.
4. Safe excavation operation
Warning: The operator must memorize the functions of each joystick to avoid
wrong operation.
Warning: Improper use of the excavator may result in tipping and slipping.
Remembering this section provides correct guidance for ensuring your personal
safety.
1) Before work, idle personnel inside the
excavation site should be cleared out.
2) Confirm that the workplace can fully
support the machine before driving in.
3) The two tracks of the excavator should be
kept on the same plane as much as possible
before operation.
4) Confirm that there are no cables, gas
pipes, or water pipes underground in the
workplace, or that their specific locations
have been identified before excavation can
be carried out.
5) When the machine is working backwards
(such as digging trenches), it should be
checked whether the movement route is flat
and free of obstacles. Only when safety is
ensured can the machine be moved,
otherwise it may cause the machine to tip
over.
Summary of Contents for U35
