![background image](http://html2.mh-extra.com/html/yuchai/u35/u35_operators-manual_4668496106.webp)
5-3
Waste disposal
For environmental protection, special attention should be paid to the disposal methods of
waste:
● Put the oil discharged from the machine into a container. Do not discharge the oil directly
onto the ground, or pour it into sewers, drains, rivers, oceans or lakes.
● When handling harmful substances such as oil, fuel, coolant, antifreeze, plastic
accessories, solvents, filter cartridges, batteries, and other harmful substances, relevant
environmental regulations should be followed.
Prevent articles from falling into the machine
● When opening the tank filling port for inspection, be careful not to drop bolts, nuts, gaskets,
or tools into the interior of the machine. Otherwise, this will cause damage and malfunction
of the machine, and may lead to accidents. If foreign material falls into the machine, take it
out immediately.
● Before and after the inspection, check the tools and parts you carried to make sure that
nothing has fallen into the machine.
Regular inspection and maintenance
Regular inspection and maintenance shall be carried out in accordance with the items listed
in the "Regular Inspection and Maintenance Table", which is an important prerequisite for
ensuring the normal operation of the machine and prolonging its service life. Be sure to
observe the inspection and maintenance cycle.
Recheck after inspection and maintenance
If there is no recheck after each inspection and maintenance, there is a possibility of
unexpected failure, leading to serious injury or damage. Make sure to
check as follows:
● Are there any missing parts that should be inspected and maintained.
● Have all inspection and maintenance items been carried out correctly.
● Check if any tools or parts have fallen into the machine. It is very dangerous for parts to fall
into the machine and get stuck in the linkage mechanism.
● Check around the machine to see if there is any water or oil leakage, and whether all the
bolts have been tightened.
Summary of Contents for U35
