![background image](http://html2.mh-extra.com/html/yuchai/u35/u35_operators-manual_4668496044.webp)
2-30
Cab flipping
When flipping the cab, first lower the boom
and bucket arm close to the ground, and
then perform the flipping operation.
Otherwise, if the attachment is not placed on
a horizontal surface, flipping up the cab may
cause the front window of the cab to touch
the boom and damage the glass.
When maintaining and inspecting the interior
of the machine platform, first open the rear
door, and then make sure to unscrew the two
bolts connecting the platform and the cab.
Then, insert a hand joystick into the hand
pump and follow the instructions of the hand
pump to lift the cab. For safety reasons,
support the cab with the hand joystick, with
one end of the protective rod supported on
the control baseplate, and the other end
fixed on the frame beam support, then carry
out internal maintenance or repair work.
Warning: Due to the fact that the two bolts are connected to the beam of the
platform and the driver's cab, which is relatively concealed and cannot be
seen clearly, it is necessary to ensure that the two bolts are unscrewed
before shaking the pump. Otherwise, the forced pressure may affect the
service life of the hand pump.
Summary of Contents for U35
