www.youfibercable.com
Email:[email protected] MSN:[email protected]
5
1 General information
This manual contains complete performance and operation for FUSION SPLICER. FUSION
SPLICER uses the high-speed image process technology and special exact orientation technology,
so that the whole process of fiber’s fusion can be finished in 9 seconds automatically. LCD monitor
makes each process of fiber fusion clear. Because of small bulk, light weight and AC
、
DC power
supply, it is the same with the project and maintenance of telecommunications, cable TV, railway,
petrochemistry, electric power, army, police and scientific research organizations.
1.1
Applicable range
SM (Single-mode), MM (Multi-mode) silex-fiber
125µm outer diameter (standard)
0.2
～
1.5mm outer coating diameter
Fiber cleaved length: 16mm (standard)
1.2
Specifications:
·
Screen: 5 inches color LCD Monitor
·
Display: Display X and Y axis simultaneously
·
Environment: Temperature: -10
～
50
℃
Storage: -40
～
60
℃
Humidity: <95%RH (without dew)
Storage humidity: no dew
·
Average fusion loss: 0.02dB (SMF), 0.01dB (MMF)
·
Average fusion time: 9secs. (standard SM)
·
Average heat time: 30 secs. (Setting heat time optionally)
·
Fusion program: 12(templet),188(user)
·
Internal light(setting fiber at night)
·
Internal heater
·
Setting the parameters: Testing end-face angle, Push distance, Pre-fusion current,
Pre-fusion time, Fusion current, Fusion time etc.
·
Power supply(average): Alternating Current: 100-240V 50Hz / 60Hz 30W
Direct Current: 13.5V/5A/ 25W
·
Fusion results storage: 5000
·
Inner Li-ion battery and AC adaptor
·
Appearance: 150mm (length) x150mm (width) x160mm (height)
·
Weight: 3.52 Kg (with battery module)