YouXin FSP-100, User Manual, Page: 18 / 32

www.youfibercable.com
Email:youfibercable@youfibercable.com MSN:youfiber@hotmail.com 18
7.6.4 Arc record
When machine open this function, the right menu will appeared, so you can check arc amount.
7.6.5 Zero to take count of arc
When you replace with new electrode, you an carry “ Zero to take
Count of arc”, press “ENT” to confirm zero and press “MENU”
To exit.
7.6.6
Splicing record
Splicing time and loss will be shown in this function, (consult the
Picture on the right.
Fusion Splicer
can keeps 5000 records, the
number of latestrecord is 0001, until the oldest number 5000.
Press “▲” or “▼” to turn page,press “MENU” to exit.
7.6.7 Languages
To choose the language of menu.
8 Selecting fusion programer
8.1 Overview of fusion program
Fusion splicer has 200 kinds of fusion program (100 kinds for SM,
100 kinds for MM).
1>
Factory setup program No.1~No.5.
2> Users setup program No.7~No.100.
3> Program No.6 is saved program after test the current is suitable.
4> You should select proper fusion program base actual splice fiber(SM or MM).
8.2 Selecting fusion program
Fusion Splicer
provides function to correct arc current automatically, to satisfy different
requirement; you can select different fusion parameters. The operations are as follows:
1>
Press “MENU” to enter the first class menu;
2> Press “▲” or “▼” to make cursor “
→
” point to “Fusion fiber”.
3> Press “◄” or “►” to select the value of “Fusion fiber”.
4> Press “▲” or “▼” to make cursor “
→
” point to “Fusion program”.
5> Press “◄” or “►” to select needed arc program.
6> Press “MENU” to enter program parameter menu.
7> Press “▲” or “▼” to make cursor “
→
” point to modifiable parameter
8> Press “◄” or “►” to increase or decrease the quantity of selected parameter.
9> Press “ENT” to save program parameter after confirming.
10> Press “MENU” to exit menu in turn.
 Notice:
1) Press “AUTO” to modify step-size among “1”, “10”, “100” under two class menu.
2) You can only modify arc program No.6~No.100, but can refer to program No.1~No.5.
8.3 Arc test
The field conditions (such as fiber, altitude, climate, electrode status, etc.) are
influential to splice loss. To get low loss,
Fusion Splicer
provides test function to modify
08-10-10 15:30
0001 2008-10-10 10:21
Loss: 0.01dB
0002 2008-10-10 10:23
Loss: 0.02dB
0003 2008-10-10 10:25
Loss: 0.01dB
0004 2008-10-10 10:28
Loss: 0.01dB
↓↑ (P00004) ↑
↓=N.page↑=L.page
MENU=esc