www.youfibercable.com
Email:[email protected] MSN:[email protected]
4
7.6.1
Cleaning electrode and electrode aging
7.6.2
Image turn over
7.6.3
Setting time/date
7.6.4
Arc record
7.6.5
Zero to take count of arc
7.6.6
Splicing record
7.6.7
Language
7.6.8
RS 232
8
Selecting fusion program
8.1
Overview of fusion program
8.2
Selecting fusion program
8.3
Arc test
8.4
Optimization of arc parameter
8.4.1
Optimization of SM fiber’s arc parameter
8.4.2
Optimization of MM fiber’s arc parameter
9
Setting working mode and parameter
9.1
Setting working mode
9.2
Setting working parameter
10
Maintenance
10.1
Replacing electrode
10.2
Maintenance of electrode
10.3
Cleaning V-groove
10.4
Cleaning lens of microscope
10.5
Maintenance of machine
11
Notice
11.1
Shipping and storing
11.2
Operating instructions
12 Addenda A Operating fusion splicer skillfully
13 Addenda B Explanations about arc test
14 Addenda C Unusual condition, confirmation and solution
15 Addenda D Introduction of power supply modules
16 Addenda E Clean V-groove and fiber
17 addenda F Contact information