YOKOGAWA XL100, User Manual

Page: 81 / 134

5-21
IM XL100C-E
1
2
3
4
5
6
7
App
Index
Standard Protocol
Basic Setting Commands
• In order to activate the settings that are changed using the basic setting commands,
the basic settings must be saved using the XE command. Be sure to save the settings
with the XE command before starting the logging operation from a logging stopped
state. If you do not, the settings before the change are activated.
• The settings that are returned in response to a query while logging is stopped will
contain the new settings even if they are not saved with the XE command. However,
the new settings will not be activated until they are saved. In order to activate the new
settings, the XE command must be issued as described earlier. If you discard the
settings with the XE command or start the logging operation from a logging stopped
state before saving the settings with the XE command, the settings that are returned
in response to a query are those before the change.
Type Command Function Usable State Administrator User Page
Setting
XA Sets the alarm. Logging stopped Yes No 5-32
XI Sets the filter. Logging stopped Yes No 5-32
XB Burnout (query only) All Yes Yes 5-33
XJ RJC (query only) All Yes Yes 5-33
XV Sets the sampling interval. Logging stopped Yes No 5-33
XS Reserved
XM Reserved
XT Selects the temperature unit. Logging stopped Yes No 5-33
XU Sets the language. Logging stopped Yes No 5-33
XR Reserved
XQ Reserved
RO Reserved
RM Reserved
XD Sets the data save operation. Logging stopped Yes No 5-33
XO Selects the communication method. Logging stopped Yes No 5-33
XZ Selects the trigger. Logging stopped Yes No 5-34
XK Selects the start trigger. Logging stopped Yes No 5-34
XL Selects the end trigger. Logging stopped Yes No 5-35
XH Sets the key login and auto logout functions. Logging stopped Yes No 5-35
XE Sets whether or not to store the basic settings. Logging stopped Yes No 5-35
XG Sets the time zone. Logging stopped Yes No 5-36
XP Reserved
XW Sets the ID number. Logging stopped Yes No 5-36
XY Sets the statistical calculation. Logging stopped Yes No 5-36
YA Sets the IP address, subnet mask, Logging stopped Yes No 5-36
default gateway, and DHCP function.
YD Sets the Ethernet login function. Logging stopped Yes Yes 5-36
YK Sets the keepalive. Logging stopped Yes No 5-36
YN Sets the DNS. Logging stopped Yes No 5-37
YE Sets the SNTP (time synchronization function). Logging stopped Yes No 5-37
YQ Sets the communication timeout. Logging stopped Yes No 5-37
YS Sets the serial interface. Logging stopped Yes No 5-37
YO Loads the setting data. Yes No 5-38
YI Saves the setting data. Logging stopped Yes No 5-38
YC Resets the system (initializes the setup data). Logging stopped Yes No 5-38
YT Sets the FTP client. Logging stopped Yes No 5-38
YG Sets whether to use the Web server function. Logging stopped Yes No 5-38
YL Sets the operation of the Modbus master function. Logging stopped Yes No 5-39
YM Sets the command of the Modbus master function. Logging stopped Yes No 5-39
Yes: Command usable No: Command not usable
5.3 A List of Commands