YOKOGAWA XL100, User Manual

Page: 80 / 134

5-20
IM XL100C-E
Note
• The operation of the XL100 can be divided into two states, logging stopped state and logging
state. The logging stopped state includes Free Running Mode, File Operation Mode, Setting Mode,
and Review Mode. The logging state includes Logging Mode and Logging & Review Mode.
A syntax error will occur if you attempt to execute a command in the wrong operation
state. If this happens, stop the logging operation with the PS command to switch to the
Free Running state, and then execute the command. Query commands can be executed
regardless of the operation state.
• Logging stopped state
The settings can be changed in this state.
• Logging state
As a general rule, commands other than those used in the logging stopped state are
used in this state.
• The administrator and user specifications in the table indicate the user level that is
specified using the login function for Ethernet communications.
For details, see section 2.7.
• You can select whether to active a setting command immediately after the command is
executed or when the setting is saved with the XE command as with a basic setting
command. The BZ command is used to make the selection. You can make the activation
process in the XL100 efficient by using the BZ command first to set the commands to be
activated when the settings are saved with the XE command and then enter each setting.
At power-on, the settings are always activated immediately after a command is executed.
Type Command Function Usable State Administrator User Page
Control
UD Switches the display. All Yes No 5-30
PS Starts/Stops logging. All Yes No 5-30
AK Confirms the alarm status (alarm acknowledge). All Yes No 5-30
EV Saves the manual sampled or screen image Logging stopped Yes No 5-31
data to the storage medium.
MS Reserved
TL Reserved
DS Reserved
LO Loads the setting data. Logging stopped Yes No 5-31
LI Saves the setting data. Logging stopped Yes No 5-31
CM Sets the communication input data. All Yes No 5-31
EM Starts/Stops e-mail messages. Logging stopped Yes No 5-31
KE Key operation command All Yes No 5-31
BZ Sets the activation of the setting commands. All Yes No 5-32
Yes: Command usable No: Command not usable
5.3 A List of Commands