5-30
IM XL100C-E
BD
Sets the alarm delay sampling
count
Syntax
BD p1,p2<terminator>
p1
Reserved
p2
Alarm delay sampling count
0
to
3600
Query
BD[ p1]?
Example
Set the alarm delay sampling count to 120.
BD ,120
Description Parameter p1 is not used.
BY
Sets the automated
measurement and beep sound.
Syntax
BY p1,p2<terminator>
p1
Auto measurement OFF:
OFF
Auto measurement ON:
ON
p2
Beep sound OFF:
OFF
Beep sound ON:
ON
Query
BY?
Example
Turn the automated measurement and beep
sound OFF.
BY ON,OFF
Description This command cannot be issued while logging is
in progress.
5.6
Setting Commands (Control)
UD
Switches the display
When switching the display back to the display
that existed before settings were changed using
communication commands
Syntax
UD p1<terminator>
p1
Display switching 0
Example
Switch the display back to the display that
existed before settings were changed using
communication commands.
UD 0
When switching the display using communication
commands
Syntax
UD p1,p2,p3<terminator>
p1
Display switching
1
p2
Display item
Waveform & digital display:
TREND
Digital display:
DIGITAL
Bar graph display:
BAR
Alarm summary display:
ALARM
Review display:
REVIEW
Reserved:
OVERVIEW
p3
Group number
1
to
4
Example
Set the display to waveform & digital, and set the
number of the group to be displayed to 4.
UD 1,TREND,4
Description • This command is valid only when the current
display is one of the displays of p2.
• If p2 is set to alarm summary display, p3 is
discarded.
PS
Starts/Stops logging
Syntax
PS p1<terminator>
p1
Logging start/stop
Start:
0
Stop:
1
Example
Start logging.
PS 0
Description If the logging start trigger is set to manual and
logging does not start immediately, the GS610
enters logging standby until the trigger condition
is met.
AK
Acknowledges the alarm status
(alarm acknowledge)
Syntax
AK p1<terminator>
p1
Execute alarm acknowledge
0
Example
Confirm the current hold condition of the alarm
(execute alarm acknowledge).
AK 0
5.5 Setting Commands (Setting)/5.6 Setting Commands (Control)
