5-44
IM XL100C-E
FD
Outputs the most recent
measured/calculated data
Syntax
FD p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,
p11<terminator>
p1
Output data type
Output the most recent measured/calculated
data in ASCII format:
0
Output the most recent measured/calculated
data in BINARY format:
1
Reserved:
4
,
5
p2
First channel number
For 8 ch input:
01
to
08
,
For 16 ch input:
01
to
16
<Numeric value>
00
(OFF)
p3
Last channel number
For 8 ch input:
01
to
08
,
For 16 ch input:
01
to
16
<Numeric value>
00
(OFF)
p4
First pulse measurement channel number:
PL01
p5
Last pulse measurement channel number:
PL01
p6
First logic input channel number
DI01
to
DI02
p7
Last logic input channel number
DI01
to
DI02
p8
First calculation channel number
CA01
to
CA32
p9
Last calculation channel number
CA01
to
CA32
p10
First communication channel number
CO01
to
CO32
p11
Last communication channel number
CO01
to
CO32
Example
Output from the XL100 the most recent
measurement of channels 1 to 5, pulse
measurement data, and logic measurement data
1 and 2 and the calculated data of channels 1 to
5 in ASCII data format.
FD 0,01,05,PL01,PL01,DI01,DI02,CA01,
CA05,,
Description • The most recent measured/calculated data
corresponds to the most recent measured/
calculated data in the internal memory when
the XL100 receives the FD command.
• Set the first channel number and last channel
number parameters so that the last channel
number is greater than or equal to the first
channel number.
FL
Outputs the log and alarm
summary
Syntax
FL p1,p2<terminator>
p1
Log type
Communication:
COM
FTP client:
FTPC
Error message:
ERR
Key login:
KEY
Web operation:
WEB
E-mail:
Alarm summary:
ALARM
Reserved:
MSG
p2
Maximum read length of the log
When p1 is COM:
1
to
200
When p1 is ALARM:
1
to
120
When p1 is some type other than the above:
1
to
50
Example
Output the 10 most recent error message logs.
FL ERR,10
Description • Outputs the log that is stored in the XL100.
• If p2 is omitted, all written logs are output.
IS
Outputs status information
Syntax
IS p1<terminator>
p1
Status information output
0
Example
Output status information.
IS 0
Description The output status can be masked using the
status filter (IF command).
FU
Outputs the user level
Syntax
FU p1<terminator>
p1
User information output
0
Example
Output user information.
FU 0
Description Outputs the information of the user currently
connected to the XL100. For details, see section
6.2, “Response Syntax.”
ME
Outputs the data stored on the
storage medium
Syntax
ME p1,p2,p3<terminator>
p1
Operation type
Output the file list:
DIR
Output (first time):
GET
Output (subsequent times). This parameter
is used to output the remaining data when
the first output operation is not adequate:
NEXT
Retransmit the previous output:
RESEND
Delete:
DEL
Outputs the subsequent file list after the file
list is output using the DIRNEXT DIR
command. The number of output lists is the
p3 value specified with the DIR command. If
this command is executed after all lists have
been output, only the free space of the
storage medium is output.
5.9 Output Commands (Setting/Measurement/Data Output)
