manualshive.com logo in svg

YOKOGAWA XL100, User Manual

Share
Download
YOKOGAWA XL100 User Manual Download Page 19

2-7

IM XL100C-E

Ethernet Interface

1

2

3

4

5

6

7

App

Index

2.4

Checking the Connection Status of the
Ethernet Interface

Checking the Connection Status on the XL100

You can check the connection status of the Ethernet interface with the LAN port LED of

the XL100.

LED Status

Connection Status of the Ethernet Interface

Green LED illuminated

The Ethernet interface is electrically connected.

Yellow LED blinking

Transmitting data.

Off

The Ethernet interface is not electrically connected.

LAN

Green LED

Blinks when data 
transmission is normal.

Illuminates when communication is 
possible with the connected destination.

Yellow LED

Checking the Connection Status on the XL100 Display

You can check the connection status with the icon that is shown in the status display

section of the XL100 display. The 

 icon appears when the interface is set to LAN, the

Ethernet parameters (IP address other than 0.0.0.0) are configured, and the cable is

connected. For other cases, the icon is gray.

Summary of Contents for XL100







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands