2-29
IM XL100C-E
Ethernet Interface
1
2
3
4
5
6
7
App
Index
2.12 E-mail Transmission Test
You can transmit test e-mail messages to recipient 1 or recipient 2 that you specified to
confirm whether e-mail messages can be transmitted.
• Items to Check before Performing This Test
• Connect the Ethernet cable correctly. For the connection procedure, see section
2.2.
• Check that the Ethernet interface settings are correct. For the procedure, see
section 2.3.
• Check that the e-mail settings are correct. For the procedure, see section 2.11.
When setting the Ethernet interface or e-mail, check the settings with your system or
network administrator.
• Checking the Results of the E-mail Transmission Test
• The result of the e-mail transmission test can be confirmed by displaying the e-mail
log (displayed on the XL100 (see section 2.8)) or Web screen (see section 2.10) or
by outputting the result using the FL command (see section 5.9).
• If an error message is displayed on the XL100, see chapter 8, “Error Messages.”
• Contents of the Test E-mail Message
The figure below shows the contents of the test e-mail message.
From: [email protected]
Date: Mon, 5 Dec 2005 07:15:41 +0900 (JST)
Subject: (XL100) Test_mail
To: [email protected]
Test mail
<Host name>
XL100
<Time of transmission>
12/05 07:15:35
Test mail example
Procedure
1.
Press
SETTING
to enter Setting Mode.
