YOKOGAWA WT1800E User Manual Download Page 10

Page: 10 / 154

IM WT18O1E-02EN

Alert mark 19.1

Setting User-Defined Functions ....................................................................................... 7-1

7.2

Setting User-Defined Events ............................................................................................ 7-2

7.3

Setting Apparent Power, Reactive Power, and Corrected Power Equations .................... 7-3

7.4

Setting the Sampling Frequency ...................................................................................... 7-4

7.5

Setting the Phase Difference Display Format................................................................... 7-5

7.6

Setting Master and Slave Synchronized Measurement ................................................... 7-6

7.7

Setting the Voltages or Currents Whose Frequencies Will Be Measured ........................ 7-7

Chapter 8 Integrated Power (Watt hour)

8.1

Setting Independent Integration ....................................................................................... 8-1

8.2

Setting Integration Conditions .......................................................................................... 8-2

8.3

Starting, Stopping, and Resetting Integration ................................................................... 8-5

8.4

Integration Resume Action at Power Failure Recovery .................................................... 8-6

Chapter 9 Waveform Display

9.1

Setting the Display Format ............................................................................................... 9-1

9.2

Turning the Display of Waveforms On and Off and Setting the Vertical Zoom Factors and
Vertical Positions .............................................................................................................. 9-3

Chapter 10 Trend Display

10.1 Setting the Display Format ............................................................................................. 10-1
10.2 Turning the Trend Display On and Off and Setting the Measurement Functions to Display

and the Vertical Scales ................................................................................................... 10-3

Chapter 11 Bar Graph Display (Option)

11.1 Setting the Display Format ..............................................................................................11-1
11.2 Setting the Measurement Function to Display and the Vertical Scale .............................11-2

Chapter 12 Vector Display (Option)

12.1 Setting the Display Format ............................................................................................. 12-1
12.2 Setting the Element and Wiring Unit to Display and the Zoom Factor ........................... 12-2

Chapter 13 Split Display

13.1 Configuring the Split Display .......................................................................................... 13-1

Chapter 14 Cursor Measurements

14.1  Performing Cursor Measurements on Waveforms ......................................................... 14-1
14.2  Performing Cursor Measurements on Trends ................................................................ 14-2
14.3  Performing Cursor Measurements on Bar Graphs ......................................................... 14-3

Chapter 15 High Speed Data Capturing

15.1  Setting the Number of Data Captures and Configuring the Capture Control Settings ... 15-1
15.2  Configuring the Save Conditions of Captured Numeric Data ......................................... 15-4
15.3  Changing the Displayed Items for High Speed Data Capturing ..................................... 15-6
15.4  Starting and Stopping High Speed Data Capturing ........................................................ 15-9

Chapter 16 Storing Data

16.1  Configuring Storage Control ........................................................................................... 16-1
16.2  Setting the Numeric Data Items to Store ........................................................................ 16-4
16.3  Configuring the Save Conditions of Stored Numeric Data ............................................. 16-5
16.4  Starting, Stopping, and Resetting Storage ..................................................................... 16-6

Contents

Summary of Contents for WT1800E



























































































































































Search results

Summary of Contents for WT1800E

Reviews:

YOKOGAWA WT1800E, User Manual, Page: 10 / 154

Search results

Summary of Contents for WT1800E

Reviews: