1-6
IM WT18O1E-02EN
1.5 Setting the Display Format of the External
Current Sensor Range (Option)
This section explains the following setting for the external current sensor range. This feature is
available on models with the /EX1 to /EX6 option.
• Display format
►
“External Current Sensor Range Display Format (DIRECT/MEASURE; option)”
in the features guide
1.
Press the
ELEMENT
key for setting ranges to select the input element or wiring unit that you
want to set the external current sensor range of.
• If you press
ESC
to clear the setup menu from the screen, soft keys corresponding to the input elements
or wiring units will be displayed on the menu. You can use these soft keys to select the input element or
wiring unit.
• Press
SHIFT+
the
ELEMENT
(ALL) key for setting ranges to collectively configure all the input elements
for which the following conditions are met.
The input element type (for 5 A or for 50 A) is the same.
The valid measurement range setting (see section 1.7) is the same.
2.
Press
EXT SENSOR
to illuminate the EXT SENSOR key.
Press
EXT SENSOR
again to turn the EXT SENSOR key off.
3.
Press
SHIFT+
the current range’s
CONFIG
(DIRECT/MEASURE) key. The DIRECT indicator
or MEAS indicator, which indicates the display format, illuminates. The external current sensor
range is displayed in the indicated display format.
Press
SHIFT+
the current range’s
CONFIG
(DIRECT/MEASURE) key again to switch the display format.
The indicators illuminate and turn off appropriately.
External current sensor range display
(Display example of when the display format
is set to MEASURE.)
Display format indicators
(DIRECT, MEASURE)
ELEMENT key for
setting ranges