YOKOGAWA WT1800E User Manual Download Page 27

Page: 27 / 154

1-16

IM WT18O1E-02EN

1.12 Setting Measurement Periods

This section explains how to set the synchronization sources that determine the measurement period.

►

“Measurement Period (SYNC SOURCE)” in the features guide

Sync Src Menu

Press

SYNC SOURCE

to display the following menu.

Set the synchronization source

(U1, I1, U2, I2, U3, I3, U4, I4, U5, I5, U6, I6, Ext Clk, None).

Set the synchronization source for when the data

update interval is Auto

Setting the Synchronization Source for When the Data Update

Interval is Auto (Sync Source Setting)

Press

SYNC SOURCE

and then the

Sync Src Setting

soft key to display the following screen.

Set the synchronization source level for voltage, current, and external current

sensor signals.

• When the rectifier function is off: -100.0% to 100.0%

• When the rectifier function is on: 0.0% to 100.0% (absolute value)

Turn on or off the synchronization source rectifier for voltage, current,

and external current sensor signals.

To set all elements to the same setting at once, change the settings in the All column.

Summary of Contents for WT1800E



























































































































































Search results

Summary of Contents for WT1800E

Reviews:

YOKOGAWA WT1800E, User Manual, Page: 27 / 154

Search results

Summary of Contents for WT1800E

Reviews: