YOKOGAWA WT1800E User Manual Download Page 98

Page: 98 / 154

16-4

IM WT18O1E-02EN

16.2 Setting the Numeric Data Items to Store

This section explains how to set the numeric data items to store.
• Numeric data items to store

• Numeric data items that are displayed on the screen
• Numeric data items specified on the stored item setup screen

►

“Stored Items (Item Settings)” in the features guide

Item Settings Menu

Press

SHIFT+STORE START

(STORE SET) and then the

Item Settings

soft key to display the

following menu.

Stores the numeric data that is displayed on the screen

Press this soft key to store the numeric data items that are displayed on the screen.

Stores the numeric data that you have specified on the Store Items setup screen

Press this soft key to store the numeric data items that you have specified on the Store Items

setup screen that is displayed when you press the Items soft key.

Set the stored items.

This soft key is displayed when you select Selected Items.

Setting Stored Items (Items)

Press the

Items

soft key to display the following screen.

When you press the Selected Items soft key on the Item Settings menu, the numeric data items that you
have specified on the following screen are stored.

Selects all the numeric data items

Clears the selection of all the numeric data items

Selects the preset numeric data items

Select the check boxes for

the numeric items that you

want to store.

Summary of Contents for WT1800E



























































































































































Search results

Summary of Contents for WT1800E

Reviews:

YOKOGAWA WT1800E, User Manual, Page: 98 / 154

Search results

Summary of Contents for WT1800E

Reviews: