YOKOGAWA WT1800E User Manual Download Page 137

Page: 137 / 154

21-3

IM WT18O1E-02EN

21.3 Setting the Message, Menu, and USB Keyboard

Languages

This section explains the settings that you can use to change the message, menu, and USB keyboard
languages.

►

“Language (Language)” and “USB Keyboard Language (USB Keyboard)”

in the features guide

System Config Menu

Press

UTILITY

and then the

System Config

soft key to display the following menu.

Configure the language settings.

Set the USB keyboard language (Japanese, English).

Set the date and time ► section 3.4 in the getting started guide,

IM WT1801E-03EN

Configuring the Language Settings

Press the

Language

soft key to display the following menu.

Set the menu language (Japanese, English, Chinese, German).

Set the message language (Japanese, English, Chinese, German).

Note

Even if you set the menu or message language to a language other than English, some terms will be
displayed in English.

Summary of Contents for WT1800E



























































































































































Search results

Summary of Contents for WT1800E

Reviews:

YOKOGAWA WT1800E, User Manual, Page: 137 / 154

Search results

Summary of Contents for WT1800E

Reviews: