manualshive.com logo in svg

YOKOGAWA WT1800E, User Manual, Page: 93 / 154

Share
Download
YOKOGAWA WT1800E User Manual Download Page 93

15-9

IM WT18O1E-02EN

15.4  Starting and Stopping High Speed Data 

Capturing

This section explains how to start and stop high speed data capturing.

► “Starting and Stopping High Speed Data Capturing (Start/Stop)” in the features guide

 CAUTION

During high speed data capturing and when captured data is being saved, the storage 
medium is constantly being accessed, even though the icon that indicates this ( ) is not 

displayed. Do not remove the USB memory device or turn the power off. Doing so may 
damage the storage medium and corrupt its data.

  During high speed data capturing, “HS State: Start” appears in the upper right of the screen.
  While the captured data is being saved, “File State: Rec” appears in the upper left of the screen.

French

 ATTENTION

Pendant la collecte de données haute vitesse et lorsque les données collectées sont 
enregistrées, le système a constamment accès au support de stockage, même si l’icône qui 
l’indique ( ) n’est pas affichée. Ne retirez pas le support de stockage USB et ne coupez 

pas l’alimentation. Vous risqueriez d’endommager le support de stockage et les données qu’il 
contient.

  Lors de la collecte des données haute vitesse, « HS State: Start » s’affiche dans l’angle 

supérieur droit de l’écran.

  Lorsque les données collectées sont enregistrées, « File State: Rec » s’affiche dans l’angle 

supérieur gauche de l’écran.

Summary of Contents for WT1800E



























































































































































Reviews:

No comments