5-6
IM 720120-01E
To remove a signal wire, press down on the top section of the screwless terminal with a
flat-blade screwdriver and pull the wire out.
Note
Be sure to hold the SL1000 firmly while pressing down on
the top section of the screwless
terminal
with a flat-blade screwdriver.
Use the following signal wires for the alarm output.
• Signal wire thickness (single wire):
ϕ0.4 to 1.0 (AWG26 to 18)
(stranded wire):
0.3 to 0.75 mm
2
(AWG22 to 20)
• Recommended length of stripped wire: 10 mm
Circuit Diagram of the Alarm Output
ALARM
120
Ω
+5 V
4.7 k
Ω
5.4 Connecting the Alarm Output Terminals (ALARM)