1-5
Names and Uses of Parts
IM 720120-01E
1
2
3
4
5
6
7
App
Index
Displayed Items
Function
Group ID
Displays the group ID of the unit that you have set using the rotary
switch (GROUP) on the rear panel.
Unit ID
Displays the unit ID that you have set using the rotary switch (UNIT) on
the rear panel.
Module status icon
Displays the module installation status for each slot using icons.
With model display:
Indicated module installed
No display:
No module installed
Error information
Displays an error or message code and the time of occurrence
An error is indicated with “E:” before the code. A message is indicated
with “M:” before the code.
The time of occurrence is expressed in hour:minute:second (hh:mm:ss).
Displays the most recent four errors.
For details on errors and messages, see section 6.2.
Instrument No.
Displays the SL1000 unit’s instrument number.
IP address
Displays the IP address setting of the SL1000.
Date and time
Displays the SL1000 unit’s date and time.
YYYY/MM/DD hh:mm:ss
Status icon
Indicates the SL1000 status using icons.
• System error icon
ON: System error status
1
OFF: Normal system status
• Alarm icon
ON: Channel alarm occurring
OFF: Channel alarm not occurring
• HDD access icon
Blinking: Internal hard disk in access
OFF: Internal hard disk not in access
• HDD FULL icon
ON: No free space on the internal hard disk
OFF: Free space available on the internal
hard disk
• Remote icon
ON: Remote mode
OFF: Local mode
• Measure icon
ON: Measuring
OFF: Stopped
• GO icon
ON: Delivering GO output
OFF: Not delivering GO output
• NO-GO icon
ON: Delivering NO-GO output
OFF: Not delivering NO-GO output
• Sync icon
ON: Synchronous operation state
2
A state in which synchronization has been
established between SL1000 units after
starting synchronous operation in the
Acquisition Software’s system configuration.
OFF: Independent operation state
• Sync-wait icon
ON: Sync wait state
2, 3
A state in which the sync cable has been
disconnected during synchronous operation
or when the power switch has been turned
off and turned back on during synchronous
operation.
OFF: Independent operation state
1 HDD full, buffer overrun, fan stop, or sync error.
2 Displayed on all units in the group.
3 To switch from the sync-wait state to the sync state, start synchronous operation in the
Acquisition Software’s system configuration.
Status icon
System error
Alarm
HDD access
HDD FULL
Remote
Measure
GO
NO-GO
Sync
Sync-wait
1.3 Display