3-12
IM 720120-01E
Connecting the Power Cord
1.
Check that the power switch on the rear panel is OFF.
2.
Connect the power cord plug to the power connector on the rear panel.
3.
Connect the plug on the other end of the power cord to the outlet that meets the
conditions below. The AC outlet must be of a three-prong type with a protective
earth ground terminal.
Item
Rated supply voltage*
100 to 120 VAC or 220 to 240 VAC
(automatic switching)
Permitted supply voltage range
90 to 132 VAC, 198 to 264 VAC
Rated power supply frequency
50/60 Hz
Permitted power supply frequency range
48 to 63 Hz
Maximum power consumption
Approx. 300 VA
* The instrument can use a 100-V or a 200-V system for the power supply. The maximum rated
voltage of the power cord varies depending on its type. Check that the voltage supplied to the
instrument is less than or equal to the maximum rated voltage of the provided power cord (see
page iii) before using it.
Power cord
(standard accessory)
3-prong outlet
100-120 V
220-240 V
AC
300 V
A MAX 50/60 Hz
TRIG
IN
TRIG
OUT
POWER
ON
OFF
LINK
ACT
ETHERNET
1000BA
SE-T
Turn ON the Power Switch
Items to Be Checked before Turning ON the Power
• Check that the instrument is properly installed. For details, see section 3.2, “Installing
the Instrument.”
• Check that the power cord is properly connected. For details, see the previous page.
Turn ON the Power Switch
1.
Press the ON (I) side of the power switch on the rear panel.
100-120
V
220-240
V AC
300 VA MAX
50/60 Hz
TRIG IN
TRIG OUT
POWER
ON
OFF
LINK
ACT
ETHERNET
1000BASE-T
3.4 Connecting the Power Supply