《目次》 《索引》
TI 71M01D03-03
1st Edition : 2007.03.12-00
6-2.6 Physical I/O configuration and logic set function
Operation Flow
Click [I/O].
17
17
20
18
19
20
18
19
Here, you will see how to configure and set logic for
the physically equipped I/O (physical I/O).
Select [Physical I/O]
for [Type].
Select [IN] or [OUT]
for [I/O].
Select required I/O
※
.
Checked physical
I/O’s show that
they are in
positive logic.
Code input
Execution
command for
table operation
PLC
Positioning
signal
Drv.GⅢ
T
V
Executed table number
ON
ON
Motor
Settling time
※Positioning signal becomes ON state after coin signal turns ON if [Coin waiting] is
set [Valid] when creating table data. If it is set as [Invalid], it becomes ON state
immediately after positioning command is complete.
※
Time chart
Executed table number
ON
ON
(※)Refer to [Types of Logic I/O] of“6.1.1 I/O Signals” of TI
for each signal information.
I/O setting window is
displayed.
Set physical I/O.
Set physical I/O.
See also “8.6.3 I/O” in the TI
21
21
Click [Regist].
Selected physical I/O is
configured.
See also “6.4.1(3) Table Data Operation” in the TI
6-7
