《目次》 《索引》
TI 71M01D03-03
1st Edition : 2007.03.12-00
6-1.2 Creation of homing table data
Operation Flow
1
Double-click # 000.
Select [Enable] for
[Enable home sensor].
2
3
4
Create table data to execute homing operation.
Table # 000 is used in this example.
4
Select [Inside] for
[Select home sensor
inside].
3
1
Click [Table data].
2
5
5
Select [Homing].
Complete!
Table setup window
Hereinafter, this window
shall be referred if it is
described as [Table setup
window].
6
6
Select Enable] for
[Coin waiting].
7
7
Click [Regist].
[Table setup window] is
displayed.
#Parameter setup window is
displayed.
Setup window for homing is
displayed.
Table of homing operation is
registered in # 000.
Coin waiting is enabled.
Home position is detected by
signal from home sensor.
Z-pulse edge is detected
within ON area of home
sensing signal.
6-2
