《目次》 《索引》
TI 71M01D03-03
1st Edition : 2007.03.12-00
0.4 Change parameters via terminal window
Terminal window allows to change a variety of parameters and commands.
Follow the below procedure if you see “change the parameter via terminal
window” hereinafter.
When using this function, some commands may complete each other if another
dialog function is activated. Please be careful especially when issuing
operation command from terminal as the motor may unexpectedly move.
Operation Flow
Click [Terminal] button.
Terminal Window
Command entry edit box
Transmission/receiption edit
box
See also “8.4.2 Terminal” in the TI
Terminal window is displayed.
Enter in this cell when
referring to parameter
settings or changing
parameters.
Parameter detail and result
of change entered into the
command entry edit box are
displayed.
#Parameter list
#Monitor list
Command list
Command list to operate the
drive is displayed.
Parameter number and detail
are displayed.
List of variables to monitor
the status of motor or drive
is displayed.
Warning
More details in “Epexegesis”
in the next page
0-3
