2-2
IM DM7560-01EN
2.1 Installation of instrument
2.1.2 Installation state
This instrument may be installed horizontally or tilted using the handle as shown in Figure 2.1(a) and (b).
When moving the handle, pull it outward at the handle pivot, and lock the handle in any of the (a), (b),
and (c) positions in Figure 2.1 by pressing inward.
CAUTION
When changing the handle position, be careful not to get your fingers caught.
French
ATTENTION
Lors d’un déplacement, faire attention à ne pas se pincer les doigts.
The state in Figure 2.1(c) (with the back facing down) is a temporary position; do not measure in this
state.
Handle
Figure 2.1(a) Installation state A (horizontal)
Handle pivot
Figure 2.1(b) Installation state B (tilted using handle)
Do not use this state for
measurement.
The performance cannot be
ensured.
Use this position for storage
and temporary placement.
Be careful not to tip over the
instrument due to vibration or
shock.
When carrying this
instrument, hold the
handle with your hand
with the handle in this
position.
Figure 2.1(c) State C (with the back facing down)