manualshive.com logo in svg

YOKOGAWA DM7560, Getting Started Manual

Share
Download
YOKOGAWA DM7560 Getting Started Manual Download Page 58

4-17

IM DM7560-02EN

Specifications

4 

4.6 

Screen display switching

4.6.1 

Primary display

Numeric value display

Size 

NORMAL, LARGE

Font 

NORMAL (Gothic), 7SEG.

Trend chart display

 

Refer to 4.7.

Histogram chart display

 

Refer to 4.8.

Arc scale meter display

 

Refer to 4.9.

LIMIT display

 

Displays judgment result of LIMIT calculation.

4.6.2 

Secondary display (in online)

Numeric value display

 

Enabled if the primary display shows other than numeric values.

Analog meter display

 

Refer to 4.10.

Statistics display

 

Enabled if statistics calculation is set ON.

LIMIT display

 

Enabled if LIMIT judgment is set ON.

 

 

* Enabled if HIGH of LIMIT calculation is ON or LOW is ON.

Time display

 

Enabled for trend chart display.

BIN information display

 

Enabled for histogram chart display

Cursor display of histogram chart

  Enabled for histogram chart display 

4.6.3 

Secondary display (in offline)

Time cursor display

 

Enabled for trend chart display/ histogram chart display

Voltage cursor display

 

Enabled for trend chart display/ histogram chart display

BIN information display

 

Enabled for histogram chart display

Cursor display of histogram chart

  Enabled for histogram chart display

Statistics display

 

Enabled for trend chart display/ histogram chart display

Summary of Contents for DM7560





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands