1-6
IM DM7560-01EN
Table 1.5 Name and function of each part of TRIG & UTILITY setting part
№
Name
Contents and functions (outline)
1
HOLD/TRIG (SETUP)
key
SETUP
• It selects start/stop of measurement when the trigger mode is set to AUTO and
is the key for manual trigger when set to SINGLE. When the mark □ flashes to
indicate the trigger action state on the upper left of the screen when the key is
pressed, the state is TRIG action state. On the other hand, when the mark on
the left of the screen becomes II when pressed, the state is HOLD.
• It also selects the trigger setting (SETUP); i.e. after pressing [SHIFT] key, press it. If
pressed, the TRIG menu opens on the lower part of the screen.
2
SHIFT (LOCAL) key
LOCAL
• If pressed once, the mark indicating the shift state is displayed and if pressed
again, the shift state is released.
• If [SHIFT] key is pressed and the corresponding key is pressed, the
measurement function or setting (blue characters) above the key in the
FUNCTION part and TRIG & UTILITY setting part on the front panel is available.
• The function to select to which of a primary display or a secondary display to
switch the measurement screen is provided, too.
• If this instrument is remotely controlled, it operates as [LOCAL] key. This
instrument changes from the remote state to the local state; i.e. keys on the
front panel become available.
3
CLOSE (COPY) key
COPY
• It is normally used to close the menu. Every time it is pressed after moving to
the lower layer; i.e. menu to submenu, the menu returns by one layer.
• It the setting menu of TRIG & UTILITY setting part opens, the setting menu of
TRIG & UTILITY setting part closes when the menu returns to the highest layer
and the screen returns the FUNCTION menu currently set.
• If [SHIFT] key is pressed and then [CLOSE(COPY)] key is pressed, the screen
hard copy (HARD COPY) or data that makes the latest measurement result text
can be output to the USB memory.
4
NULL (MATH) key
MATH
• It switches ON/OFF the NULL function (difference calculation function) in each
measurement function of FUNCTION part. It is available to the function currently
opened.
• It is also used to select MATH calculation menu; i.e. if [SHIFT] key is pressed
and then [NULL(MATH)] key is pressed, MATH menu opens at the lower part of
the screen and setting can be changed.
5
DISP (SYSTEM) key
SYSTEM
• It selects DISP setting menu; i.e. if pressed, DISPLAY menu opens at the lower
part of the screen and setting can be changed.
• It is also used to select SYSTEM setting menu. If [SHIFT] key is pressed and
then [DISP(SYSTEM)] key is pressed, SYSTEM menu opens at the lower part
of the screen and setting can be changed.
6
LOG (SAVE/RECALL)
key
SAVE/RECALL
• It sets the log function menu; i.e. if pressed, LOG menu opens at the lower part
of the screen and setting can be changed.
• It is also used to set Save/Recall of the setting condition. Press [SHIFT] key
and then press [LOG(SAVE/RECALL)] key for selection. If the key is pressed,
SETUP SAVE/RECALL menu opens at the lower part of the screen and setting
and Execution of preservation/recall can be changed.
1.1 Name and outline of each part on front panel