4-3
IM DM7560-02EN
Specifications
4.1 Common Specifications
4
Remote Interface
USB2.0
Standard equipment
LAN&RS-232
/C2 (option)
GP-IB
/C1 (option)
DIO
/CMP (option)
Remote Command
SCPI basis command
USB memory connection entrance
Standard USB2.0
Correspondence USB memory
USB memory formatted with FAT or FAT32
However, it is non-correspondence to the memory with the
security functions of the virus check and the fingerprint
authentication, etc.
Rear panel input/output (BNC and DIO)
Trigger input (BNC)
Signal level
H: 2.4 Vmin, L: 0.9 Vmax
Maximum input resisting voltage
0 to 5 V
Input impedance
Approx. 10 kΩ.
Polarity
Both edges are selectable
Pulse width
1 μs or more
Default delay
Less than 1 μs
COMPLETE output (BNC)
Signal level
H: 2.4 Vmin, L: 0.4 Vmax
Output impedance
Approx. 1 kΩ.
Polarity
Positive logic
Output
pulse width
At OFF of LIMIT judge
10 μs
At ON of LIMIT judge
4.0 ms or more
INHIBIT input (DIO option)
Signal level
H: 2.4 Vmin, L: 0.6 Vmax
Maximum input resisting voltage
0 to 5 V
Polarity
POSITIVE (positive logic operation) / NEGATIVE (negative
logic operation)
Input impedance
Approx. 5 kΩ.
LIMIT judge output (DIO option)
COMPLETE, GO, HI, LO
1) Outputs only at LIMIT judge ON and DIO output ON.
2) This outputs contact signal by PHOTO MOS FET and
BNC is outputted with timing delayed from output.
Withstand voltage
42 Vpeak
between terminals
±42 Vpeak
Max.allowable current
100 mA
