6-7
IM DLM4038-03EN
Specifications
1
2
3
4
5
6
App
Index
Item
Specifications
TV:
Triggers on the specified field number, line number, or polarity in video signals of
various broadcasting systems.
The source can be set to a signal from CH1 to CH8.
Mode:
NTSC: Triggers on an NTSC (525/60/2) signal
PAL:
Triggers on a PAL (625/50/2) signal
SDTV: Triggers on an SDTV (480/60p) signal
HDTV: Triggers on the following HDTV signals
1080/60i, 1080/50i, 720/60p, 1080/25p, 1080/24p, 1080/24sF,
1080/60p
UserdefTV: You can trigger on any TV signal by selecting standard or
high definition, setting the H sync period, and setting the
sync guard. Sync guard can be set to a value from 60 to
90% of the H sync value in 1% steps.
Polarity: Pos, Neg
HF Rej: NTSC/PAL: 300 kHz (fixed)
SDTV/HDTV: OFF (fixed)
UserdefTV: Off or 300 kHz
Line:
5 to 1054(NTSC), 2 to 1251(PAL), 8 to 2251(SDTV),
2 to 2251(HDTV), 2 to 2251(UserdefTV), ALL
Field:
1, 2, X
Frame Skip: 1, 2, 4, 8
AB trigger
A trigger set with the B TRIG key
Triggers on the combination of triggers A and B
The trigger conditions specified with the EDGE or ENHANCED key are assigned to trigger A; trigger
conditions specified with the B TRIG menu are assigned to trigger B.
Some trigger types cannot be specified depending on the AB trigger type as shown below.
OFF:
Triggers only on the trigger A conditions (the trigger B conditions are not used).
A Delay B:
After the trigger A conditions are met and the specified amount of time elapses,
the DLM4000 triggers when the trigger B conditions are met.
Trigger B cannot be set to Edge OR, Width, PSI5 Airbag, or TV.
Delay value: 10 ns to 10 s
A −> B(N):
After the trigger A conditions are met, the DLM4000 triggers when the trigger B
conditions are met N times.
Trigger B cannot be set to Edge OR, Width, PSI5 Airbag, or TV.
N value: 1 to 10
9
Dual Bus:
Triggers when the serial bus trigger (except PSI5 Airbag) A or B conditions are
met.
Forced trigger
A trigger that is forced, regardless of whether the trigger conditions are met.
6.2 Triggering Section
