6-6
IM DLM4038-03EN
Item
Specifications
CAN FD:
1
Triggers on a CAN FD bus signal (ISO 11898-1: 2015 or non-ISO)
The source can be set to a signal from CH1 to CH8.
Mode:
SOF, Error, ID/Data, ID OR, FDF, ESI
Bit Rate: Arbitration phase
250 k, 500 k, 1 Mbps, User Define
For User Define, you can set a value from 20 k to 1 Mbps in 0.1-kbps
steps.
Data phase
500 k, 1 Mbps, 2 Mbps, 4 Mbps, 5 Mbps, 8 Mbps, User Define
For User Define, you can set a value from 250 k to 10 Mbps in 0.1-kbps
steps.
LIN:
1
Triggers on a LIN (Local Interconnect Network) bus signal
The source can be set to a signal from CH1 to CH8.
Mode:
Break Synch, Error, ID/Data, ID OR
Bit Rate: 1200, 2400, 4800, 9600, 19200bps, User Define
For User Define, you can set a value from 1 k to 20 kbps in 0.01-kbps steps.
SENT:
1
Triggers on SENT signals (J2716 APR2016 and earlier)
The source can be set to a signal from CH1 to CH8 or LOGIC
2
.
Mode:
Every Fast CH, Fast CH S&C (Status & Communication), Fast CH Data,
Every Slow CH, Slow CH ID/Data, Error
Clock period: 1 μs to 100 μs (resolution: 0.01 μs)
PSI5 Airbag:
1
Triggers on PSI5 Airbag signal
The source can be set to a signal from CH1 to CH8.
Mode:
Sync, Start Bit, Data
Bit Rate: 125kbps, 189kbps, User Define
For User Define, you can set a value from 10.0 k to 1000.0 kbps in 0.1-kbps
steps.
UART:
1
Triggers on a UART (RS232) signal
The source can be set to a signal from CH1 to CH8 or LOGIC
2
.
Mode:
Every Data, Error, Data
Format: 8-bit data (no parity bit), 7-bit data + parity bit,
8-bit data + parity bit
Bit Rate: 1200, 2400, 4800, 9600, 19200 bps, 38400 bps, 57600 bps, 115200
bps, User Define
For User Define, you can set a value from 1 k to 10000 kbps in 0.1 kbps steps.
I2C:
1
Triggers on an I2C bus signal
The source can be set to a signal from CH1 to CH8 or LOGIC
2
.
Mode: Every Start, Adr Data, NON ACK, General Call, Start byte, HS Mode
SPI:
1
Triggers on an SPI (Serial Peripheral Interface) bus signal
The source can be set to a signal from CH1 to CH8 or LOGIC
2
.
Mode: 3 Wire, 4 Wire
User Define:
Triggers on a general-purpose serial communication signal
The source can be set to a signal from CH1 to CH8.
Data channel, chip select channel, clock channel, and latch channel can be
specified.
Bit Rate: 1 k to 100 Mbps (with clock)
1 k to 50 Mbps (without clock)
Data Size: 1 to 128 bits
1 CAN FD, LIN, SENT, PSI5, UART, I2C, and SPI are options.
2 For LOGIC ports, L0 to L7, A0 to A7 and B0 to B7 bits can be set individually or at the port level.
A0 to A7 and B0 to B7 are available on models with the /L16 option.
6.2 Triggering Section
