1-10
IM DLM4038-03EN
SHIFT Key
Press this key once to illuminate it and access the features that are written in purple below each key.
Press the key again to disable the shifted state.
Jog Shuttle
When configuring various settings, use the jog shuttle to set values, move cursors, and select items.
Turn the shuttle ring to vary the rate at which values change. The rate is set according to the shuttle
ring angle.
SET ( ) Key
Press this key to enter the menu item that you selected using the jog shuttle.
If there are two items on the jog shuttle setup menu, you can press the key to change the item that the
jog shuttle controls.
Move the SET key left and right to move the cursor between numeric digits.
Move the SET key up and down to increase and decrease a value. You can change the setting on a
dialog menu by moving the key up, down, left, and right.
RESET ( ) Key
Resets an entered value to its default value.
Soft Keys
Use these keys to select items on the setup menus that appear during configuration.
ESC Key
Use this key to close setup menus and dialog boxes and to return to the menu level above the current
one.
Notes about the Operation of Knobs with Push Switches
The following knobs have push switches: POSITION (vertical and horizontal), SCALE, LEVEL, and
ZOOM. Push the knobs straight. If you push a knob at an angle, it may not operate properly. If this
happens, push the knob straight one more time.
CAUTION
Do not push a knob sideways with strong force. If you do, the knob may break.
French
ATTENTION
Ne pas enfoncer les boutons latéralement en employant une force excessive. Cela pourrait
les endommager, voire les casser..
1.2 Keys and Knobs
