3-2
IM DLM4038-03EN
3.1 Key and Jog Shuttle Operations
RESET Key ( ) Operation
If you press RESET when you are using the jog shuttle
to set a value or select an item, the setting is reset to its
default value (depending on the operating state of the
DLM4000, the setting may not be reset).
SET Key ( ) Operations
The operation varies as indicated below depending on
what you are setting.
• When There Are Two Values to Set in the Jog
Shuttle Setup Menu
The setting that the jog shuttle sets switches each time you press the SET key.
• When the Jog Shuttle and SET Key Marks (
) Are Displayed in the Setup Menu
Press SET to confirm the selected item.
• When You Are Setting a Value
Moving the SET key up or down moves the value up or down.
Moving the SET key to the left and right changes which digit to set.
• When Selecting the Item to Set
Moving the SET key up, down, left, and right moves the cursor.
How to Enter Values in Setup Dialog Boxes
1.
Use the keys to display the appropriate setup dialog box.
2.
Turn the
jog shuttle
, or move the
SET
key (
) up, down, left, or right to move the cursor to
the appropriate item.
3.
Press the
SET
key (
). The operation varies depending on the selected item.
Displays a selection menu
Selects the item that the cursor is on
Selects or clears the check box
Displays a setup dialog box
Switches the selected item
(Select , , or X.)
How to Clear Setup Dialog Boxes
Press
ESC
to clear the setup dialog box from the screen.
Scroll Operation
If a vertical or horizontal scroll bar is shown on the screen, you can move the SET key up and down or
left and write to scroll.
Default value
RESET key mark
Item under the control
of the jog shuttle
SET key mark
