6-15
IM DLM3054-03EN
Specifications
1
2
3
4
5
6
App
Index
Screen Capture Data Printing and Saving
Item
Specifications
Built-in printer (Option)
Prints screen captures in the specified output format on the built-in printer.
HardCopy:
Prints the displayed screen image.
Normal:
Prints only the waveform area of the displayed screen image. The menu is
not printed. If cursor measurements or automatically measured results are
displayed, they are printed below the waveform area.
USB printer
Prints screen captures on an external USB printer. Color can be turned on or off.
HP inkjet printers are supported.
Network printer
Prints screen captures on an external printer via Ethernet.
Color can be turned on or off. HP inkjet and laser printers are supported.
HardCopy:
Prints the displayed screen image.
Normal:
Prints only the waveform area of the displayed screen image. The menu is
not printed. If cursor measurements or automatically measured results are
displayed, they are printed below the waveform area.
File
Saves screen capture data to the specified storage device using one of the following save modes.
The storage device can be set to internal storage or USB storage.
The output format is PNG, BMP, or JPEG. Available color settings are OFF, ON, ON (Rev), and ON
(Gray).
HardCopy:
Saves the displayed screen image.
Normal:
Saves only the waveform area of the displayed screen image. The menu is
not saved. If cursor measurements or automatically measured results are
displayed, they are printed below the waveform area.
Wide:
Saves a screen capture whose time axis is magnified twice. The menu is
not saved. If cursor measurements or automatically measured results are
displayed, they are printed below the waveform area.
Saving and Loading Data
Item
Specifications
Waveform data
Saves waveform data (including history waveforms) to the specified storage device.
1
The saved
data can be loaded into the instrument.
Available data formats are binary (.wdf) and ASCII (.csv). Only binary (.wdf) files can be loaded into
the instrument.
Specify the data format, waveform to be saved, history range, window to be saved (Main, Zoom1,
Zoom2), compression mode (OFF, P-P, Decimation).
When loading the data, set the load destination to ACQ memory or Ref1 (Math1) to Ref4 (Math4).
2
If waveform data is loaded into the ACQ memory, the data is cleared when you start waveform
acquisition.
Setup data
Saves setup data to the specified storage device.
1
The saved data can be loaded into the
instrument.
Setup data (storage and
recall)
Up to three sets of setup data can be stored and loaded from the internal memory.
Other types of data
The displayed screen image can be saved. Waveform zones can be saved and loaded. Polygonal
zones can be loaded. Snapshot waveforms can be saved and loaded. Automatically measured
waveform parameters can be saved. Serial bus analysis results can be saved. FFT waveform data
can be saved. Histogram data can be saved. History stamps can be saved. Symbol data can be
loaded.
1 The storage device can be set to internal storage or USB storage.
2 Ref1, Math1, Ref2, Math2 for the DLM3022. DLM3032, DLM3052
6.5 Features
