3-2
IM DLM3054-03EN
3.1 Key and Jog Shuttle Operations
ESC Key Operation
• If you press ESC when a setup menu or available options are displayed, the screen returns to the
menu level above the current one.
• If you press ESC when the highest level menu is shown, the display changes as follows.
Operation of
pressing ESC
When measured values are displayed When measured values are not
displayed
1st time
The setup menu disappears.
2nd time
Measured values move outside the
waveform area.
The jog shuttle setting menu disappears.
3rd time
The jog shuttle setting menu
disappears.
Nothing changes from this point.
From this point, the display position of
measured values switches between
outside the waveform area and inside
the area each time you press ESC.
Entering Values Using the RESET Key ( ) and SET Key ( )
When a value is being set with the jog shuttle, a RESET key mark or SET key mark appears in the jog
shuttle setting menu.
RESET Key Mark
If you press RESET when the key mark is displayed, the setting is reset to its default value (this
may not happen depending on the operating state of the instrument). The default value is shown
next to the RESET key mark.
SET Key Mark
If there are several values to be set, a SET key mark appears. Press SET to select which value the
jog shuttle will control. The jog shuttle mark displayed next to the selected value appears bright.
If you press RESET when the key mark is displayed, the setting is reset to its default value.
Default value
Item under the control of the jog shuttle
RESET key mark
SET key mark
