6-16
IM DLM3054-03EN
Other Features
Item
Specifications
Default setup
Resets the 2553A to its factory default settings.
The following settings are not reset: date and time settings, communication interface settings,
settings stored to the internal memory, language settings, and font size of measured values.
The Undo command can be used to revert to the previous settings.
Auto setup
Automatically sets the voltage scale, time scale, trigger, and other settings to the most suitable
values for the input signals.
The Undo command can be used to revert to the previous settings.
Serial bus auto setup*
Auto setup can be executed on the basis of the selected serial bus type (FlexRay, CAN, CAN FD,
LIN, CXPI, SENT, UART, I
2
C, SPI) and trigger source. The instrument can automatically set the bit
rate, source level, and other settings and trigger on the basis of these settings.
Calibration
Auto calibration and manual calibration are available.
System configuration
The date, time, and message language can be specified. The click sound can be turned on and off.
Probe compensation signal
output
Transmits signals from the front-panel probe compensation signal output terminals (approx. 1-Vp-p
and approx. 1-kHz rectangular wave).
Overview
Allows you to view the instrument system status.
Additional option licenses
Computation, trigger, analysis, and other options can be purchased and added.
Self-test
Memory, accuracy, keyboard, and printer tests are available.
Menu language
The menu language can be changed.
Help
Displays a description of the settings. Available in English and Japanese.
* Serial bus auto setup is available on models with the serial bus option.
6.5 Features
